start page | rating of books | rating of authors | reviews | copyrights

Exploring Java

Previous Chapter 7
Basic Utility Classes
Next
 

7.2 Math Utilities

Java supports integer and floating-point arithmetic directly. Higher-level math operations are supported through the java.lang.Math class. Java provides wrapper classes for all primitive data types, so you can treat them as objects if necessary. Java also provides the java.util.Random class for generating random numbers.

Java handles errors in integer arithmetic by throwing an ArithmeticException:

int zero = 0; 
 
try { 
    int i = 72 / zero; 
}  
catch ( ArithmeticException e ) {       // division by zero 
} 

To generate the error in the above example, we created the intermediate variable zero. The compiler is somewhat crafty and would have caught us if we had blatantly tried to perform a division by zero.

Floating-point arithmetic expressions, on the other hand, don't throw exceptions. Instead, they take on the special out-of-range values shown in Table 7.3.

Table 7.3: Special Floating-Point Values
Value Mathematical representation
POSITIVE_INFINITY 1.0/0.0
NEGATIVE_INFINITY -1.0/0.0
NaN 0.0/0.0

The following example generates an infinite result:

double zero = 0.0; 
double d = 1.0/zero; 
 
if ( d == Double.POSITIVE_INFINITY ) 
    System.out.println( "Division by zero" ); 

The special value NaN indicates the result is "not a number." The value NaN has the special distinction of not being equal to itself (NaN != NaN). Use Float.isNaN() or Double.isNaN() to test for NaN.

java.lang.Math

The java.lang.Math class serves as Java's math library. All its methods are static and used directly ; you can't instantiate a Math object. We use this kind of degenerate class when we really want methods to approximate normal functions in C. While this tactic defies the principles of object-oriented design, it makes sense in this case, as it provides a means of grouping some related utility functions in a single class. Table 7.4 summarizes the methods in java.lang.Math.

Table 7.4: Methods in java.lang.Math
Method Argument type(s) Functionality
Math.abs(a)

int, long, float, double

Absolute value
Math.acos(a) double Arc cosine
Math.asin(a) double Arc sine
Math.atan(a) double Arc tangent
Math.atan2(a,b) double

Converts rectangular to polar coordinates

Math.ceil(a) double

Smallest whole number greater than or equal to a

Math.cos(a) double Cosine
Math.exp(a) double

Exponential number to the power of a

Math.floor(a) double

Largest whole number less than or equal to a

Math.log(a) double Natural logarithm of a
Math.max(a, b)

int, long, float, double

Maximum
Math.min(a, b)

int, long, float, double

Minimum
Math.pow(a, b) double

a to the power of b

Math.random() None Random number generator
Math.rint(a) double

Converts double value to integral value in double format

Math.round(a)

float, double

Rounds
Math.sin(a) double Sine
Math.sqrt(a) double Square root
Math.tan(a) double Tangent

log(), pow(), and sqrt() can throw an ArithmeticException. abs(), max(), and min() are overloaded for all the scalar values, int, long, float, or double, and return the corresponding type. Versions of Math.round() accept either float or double and return int or long respectively. The rest of the methods operate on and return double values:

double irrational = Math.sqrt( 2.0 ); 
int bigger = Math.max( 3, 4 ); 
long one = Math.round( 1.125798 ); 

For convenience, Math also contains the static final double values E and PI:

double circumference = diameter * Math.PI; 

java.math

If a long or a double just isn't big enough for you, the java.math package provides two classes, BigInteger and BigDecimal, that support arbitrary-precision numbers. These are full-featured classes with a bevy of methods for performing arbitrary-precision math. In the following example, we use BigInteger to add two numbers together.

try {
    BigDecimal twentyone = new BigDecimal("21");
    BigDecimal seven = new BigDecimal("7");
    BigDecimal sum = twentyone.add(seven);
     
    int twentyeight = sum.intValue();
}
catch (NumberFormatException nfe) { }
catch (ArithmeticException ae) { }

Wrappers for Primitive Types

In languages like Smalltalk, numbers and other simple types are objects, which makes for an elegant language design, but has trade-offs in efficiency and complexity. By contrast, there is a schism in the Java world between class types (i.e., objects) and primitive types (i.e., numbers, characters, and boolean values). Java accepts this trade-off simply for efficiency reasons. When you're crunching numbers you want your computations to be lightweight; having to use objects for primitive types would seriously affect performance. For the times you want to treat values as objects, Java supplies a wrapper class for each of the primitive types, as shown in Table 7.5.

Table 7.5: Primitive Type Wrappers
Primitive Wrapper
void java.lang.Void
boolean java.lang.Boolean
char java.lang.Character
byte java.lang.Byte
short java.lang.Short
int java.lang.Integer
long java.lang.Long
float java.lang.Float
double java.lang.Double

An instance of a wrapper class encapsulates a single value of its corresponding type. It's an immutable object that serves as a container to hold the value and let us retrieve it later. You can construct a wrapper object from a primitive value or from a String representation of the value. The following code is equivalent:

Float pi = new Float( 3.14 ); 
Float pi = new Float( "3.14" ); 

Wrapper classes throw a NumberFormatException when there is an error in parsing from a string:

try { 
    Double bogus = new Double( "huh?" ); 
} 
catch ( NumberFormatException e ) {     // bad number 
} 

You should arrange to catch this exception if you want to deal with it. Otherwise, since it's a subclass of RuntimeException, it will propagate up the call stack and eventually cause a run-time error if not caught.

Sometimes you'll use the wrapper classes simply to parse the String representation of a number:

String sheep = getParameter("sheep"); 
int n = new Integer( sheep ).intValue(); 

Here we are retrieving the value of the sheep parameter. This value is returned as a String, so we need to convert it to a numeric value before we can use it. Every wrapper class provides methods to get primitive values out of the wrapper; we are using intValue() to retrieve an int out of Integer. Since parsing a String representation of a number is such a common thing to do, the Integer and Long classes also provide the static methods Integer.parseInt() and Long.parseLong() that read a String and return the appropriate type. So the second line above is equivalent to:

int n = Integer.parseInt( sheep ); 

All wrappers provide access to their values in various forms. You can retrieve scalar values with the methods doubleValue(), floatValue(), longValue(), and intValue():

Double size = new Double ( 32.76 ); 
 
double d = size.doubleValue(); 
float f = size.floatValue(); 
long l = size.longValue(); 
int i = size.intValue(); 

The code above is equivalent to the primitive double value cast to the various types. For convenience, you can cast between the wrapper classes like Double class and the primitive data types.

Another common use of wrappers occurs when we have to treat a primitive value as an object in order to place it in a list or other structure that operates on objects. As you'll see shortly, a Vector is an extensible array of Objects. We can use wrappers to hold numbers in a Vector, along with other objects:

Vector myNumbers = new Vector(); 
 
Integer thirtyThree = new Integer( 33 ); 
myNumbers.addElement( thirtyThree ); 

Here we have created an Integer wrapper so that we can insert the number into the Vector using addElement(). Later, when we are taking elements back out of the Vector, we can get the number back out of the Integer as follows:

Integer theNumber = (Integer)myNumbers.firstElement(); 
int n = theNumber.intValue();           // n = 33 

Random Numbers

You can use the java.util.Random class to generate random values. It's a pseudo-random number generator that can be initialized with a 48-bit seed.[1] The default constructor uses the current time as a seed, but if you want a repeatable sequence, specify your own seed with:

[1] The generator uses a linear congruential formula. See The Art of Computer Programming, Volume 2 "Semi-numerical Algorithms," by Donald Knuth (Addison-Wesley).

long seed = mySeed; 
Random rnums = new Random( seed ); 

This code creates a random-number generator. Once you have a generator, you can ask for random values of various types using the methods listed in Table 7.6.

Table 7.6: Random Number Methods
Method Range
nextInt() -2147483648 to 2147483647
nextLong() -9223372036854775808 to 9223372036854775807
nextFloat() -1.0 to 1.0
nextDouble() -1.0 to 1.0

By default, the values are uniformly distributed. You can use the nextGaussian() method to create a Gaussian distribution of double values, with a mean of 0.0 and a standard deviation of 1.0.

The static method Math.random() retrieves a random double value. This method initializes a private random-number generator in the Math class, using the default Random constructor. So every call to Math.random() corresponds to a call to nextDouble() on that random number generator.


Previous Home Next
Strings Book Index Dates

Java in a Nutshell Java Language Reference Java AWT Java Fundamental Classes Exploring Java